Thursday, March 02, 2006

Replacement Enclosure pictures

So I discovered that I needed a bit more space for my mill, so here is the new enclosure under construction from the beginning.

And for comparison, the german light cruiser karlsruhe, in 1/144 scale. An Iowa class is currently being drawn up. Note BB cannon in lower left corner. The subdeck rails, cannon mounts, waterproof ESC box and gearbox are (or will be in the case of the cannon mounts) milled from aluminum on the taig. (the superstructure is cut on a buddy's laser table) (a tip to the wise, do not use splines if at all possible). More pictures of those parts will be forthcoming when I get the mill done.


Post a Comment

<< Home